Device Setup Pages
14
Mio Modero R-4 Remote - Instruction Manual
Viewing Project Information
1.
Select
Project Information
from the Setup Menu.
2.
Use the
Up/Down
touchscreen arrows to view each page.
3.
When finished, select the
Back
button until you are out of the Setup Menu.
Remote & Display Settings
The device provides you with information concerning current displays settings and allows you to edit the timeout and brightness.
Use the up and down arrows to scroll from viewable page to page.
Project Information (Cont.)
Build Number
The current build version number for the device firmware.
Charger Sensor Port
The port number for the charger sensor.
Charger Sensor Channel
The channel number for the charger sensor.
Creation Date
The date the control pages were created.
Revision Date
The date of the last revision for the control pages.
Last Save Date
The date of the last save for the control pages.
Job Comments
Any additional comments added in the designing application.
FIG. 6
Remote & Display Settings Pages
Remote & Display Settings
Display Timeout
The valid display timeout times are 0, 10, 15, 20, 25, and 30 seconds.
Sleep Timeout
The valid sleep timeout times are 0, 3, 5, 10, 15, 30, 60, 120, 180, and 240 minutes.
LCD
The current brightness of the touchscreen display, between 0 and 100.
Charge LED
The current brightness of the LED displaying charging status, between 0 and 100.
Home Hold Time
The amount of time (in seconds, 0-6) in which the selected home page will be displayed.
Inactivity
The amount of time (in minutes, 0-240) spent inactive in its charging cradle before the unit switches to its
inactivity page.
Inactivity Page
The selected page displayed when the inactivity timer expires.
Panel Type
The type of unit connected to the ZigBee network. This is always
R4
.
Firmware Version
The most current firmware version uploaded to the unit.
ZigBee Version
The most current version of the ZigBee module firmware uploaded to the device.
