![background image](http://html1.mh-extra.com/html/amx/axm-mlc/axm-mlc_instruction-manual_2939200026.webp)
18
Installing the Mini-Touch Panel
Black/White LCD Mini-Touch Panels
Mini-touch panel, 4-pin header
DB-9 connector (male)
2 (TXD)
3 (RXD)
4 (GND)
1 (+12)
4 and 7 (+12)
3 (RXD)
5 (GND)
2 (TXD)
Cleaning the Touch Overlay
After installing the mini-touch panel, you should clean the touch overlay. Clean the
touch overlay:
1.
Disconnect the AXlink, RS-232, and mini-XLR connector from the mini-touch
panel.
2.
Using a cotton cloth, spray a small amount of cleaning solution consisting of 50-
percent isopropyl alcohol and 50-percent water onto the cloth.
3.
Clean the touch overlay with the damp cloth. Then, wipe the touch overlay with
a dry cloth.
4.
Reconnect the AXlink, RS-232, and mini-XLR connector to the mini-touch panel.
Figure 21
RS-232 4-pin header-to-DB-9
connector wiring diagram
Summary of Contents for AXM-MLC
