![background image](http://html1.mh-extra.com/html/amx/axm-mlc/axm-mlc_instruction-manual_2939200023.webp)
Black/White LCD Mini-Touch Panels
Installing the Mini-Touch Panel
15
Preparing captive wires
You will need a wire stripper, soldering iron, and flat head screwdriver to prepare
and connect the captive wires.
1.
Strip 0.25 inch of wire insulation off all wires and apply a light coat of solder to
the ends using a soldering iron.
2.
Insert each wire into the appropriate opening on the connector according to the
wiring diagrams and connector types described in this section.
3.
Turn the flat head screws clockwise to secure the wire in the connector.
Using the AXlink mini-XLR connector for data and power (TiltScreen and
wood enclosure)
Connect the control system’s AXlink connector to the mini-XLR connector (male) on
the rear panel of the TiltScreen and wood enclosure mini-touch panels for data and
12 VDC power as shown in Figure 16.
GND - (BLK)
2
1
PWR + (RED)
AXM (GRN)
AXP (WHT)
3
4
1
2
3
4
1 - GND - (BLK)
3 - AXP (WHT)
2 - AXM (GRN)
4 - PWR + (RED)
Control system
4-pin mini-XLR
connector
Using the AXlink mini-XLR connector and external 12 VDC power supply
(TiltScreen and wood enclosure)
Connect the control system’s AXlink connector to the mini-XLR connector and
external 12 VDC power supply to the rear panel of the TiltScreen and wood
enclosure mini-touch panels as shown in Figure 17.
Caution
Do not over-torque the screw.
Doing so can bend the seating
pin and damage the connector.
Figure 16
Mini-XLR connector-to-control
system wiring diagram
Summary of Contents for AXM-MLC
