manualshive.com logo in svg

AMX AXM-MLC, Instruction Manual

Share
Download
AMX AXM-MLC Instruction Manual Download Page 98

90

Mini-Touch Panel Program Reference

Black/White LCD Mini-Touch Panels

BAR GRAPH

     Sets the vertical graph to a bargraph and returns to the

Attributes page. The shaded portion of the bargraph can be set to control a
device, or display a status change when the mini-touch panel is connected to
an AXCESS Control System.

SLIDER

    Changes the vertical graph into a slider and returns to the

Attributes page. The slider can be set to control a device, or display a status
change when the mini-touch panel is connected to an AXCESS Control
System.

• 

FUNCTION

     Opens the display options shown in  Figure 138. Choose one of

the options to set the vertical graph attribute.

VERTICAL DISPLAY

VERTICAL  ACTIVE

VERTICAL CENTER

HORIZONTAL DISPLAY

HORIZONTAL ACTIVE

HORIZONTAL CENTER

VERTICAL DISPLAY

     Sets the vertical graph as a vertical indicator for

external devices. Indicator levels are defined in the AXCESS software
program.

VERTICAL ACTIVE

     Sets the vertical graph as a vertical controller for

external devices. Indicator levels are defined in the AXCESS software
program. When a control level is set on the vertical graph, control data is sent
to the control system to control an external device.

VERTICAL CENTER    

Sets the vertical graph as a vertical controller with a

default control level. Levels are defined in the AXCESS software program.
When a control level change is sent to the control system, the external device
changes accordingly until the control data input stops. Then the control level
on the vertical graph returns to the default position and the external device
returns to a default control position.

Note 

The bargraph uses shading to

indicate control levels and the

slider uses a slider bar.

Figure 138

Display options

Summary of Contents for AXM-MLC

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands