manualshive.com logo in svg

AMX AXM-MLC, Instruction Manual

Share
Download
AMX AXM-MLC Instruction Manual Download Page 10

2

Introduction

Black/White LCD Mini-Touch Panels

What's New

To highlight the new information, features, and operations added since the previous
release of this manual, there are vertical margin bars adjacent to the new
information. New products and features include:

• 

AXT-MLC (/PB) TiltScreen LCD mini-touch panel installation, wiring, and
specifications

• 

AXCESS program controls for 2-way wireless communication between the
AXR-WAVES WAVE Server, and the AXT-MLC mini-touch panel equipped
with a WAV-PKM Mini-WavePack wireless power pack

• 

AXCESS program control for 1-way wireless communication between any
AMX RF and high-/low-frequency IR device, and the AXT-MLC mini-touch
panel equipped with a SMT-PKM Mini-SmartPack wireless power pack

Features

The mini-touch panel offers the following features:

• 

2.9 inch x 3.9 inch (HW) LCD

• 

320 x 240 (HV) pixel black/white LCD

• 

Up to 12 external pushbuttons, 6 on either side of display

• 

Microsoft or Logitech mouse compatible (UniMount and rack-mount models)

• 

Panel programming, screens, and drawings that can be uploaded and
downloaded with TPDOC (MS-DOS) or TPDesign (Windows) touch panel
design programs.

• 

Internal RS-232 ports for mouse and/or RS-232 communication (UniMount
and rack-mount panels only)

Summary of Contents for AXM-MLC

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands