![background image](http://html1.mh-extra.com/html/amx/axm-mlc/axm-mlc_instruction-manual_2939200127.webp)
Black/White LCD Mini-Touch Panels
Replacing the Lithium Batteries
119
11.
Place the bottom panel on the mini-touch panel and align the mini-XLR
mounting plate and screw holes. Insert the four Phillips-head screws and
tighten.
12.
Plug the AXlink mini-XLR connector back into the mini-touch panel.
AXU-MLC (/PB) and AXM-MLC (/PB)
Replace the batteries in the AXU-MLC (/PB) and AXM-MLC (/PB):
1.
Discharge the static electricity from your body by touching a grounded object.
2.
Insert a flat-blade tool into the release slot on the mini-touch panel’s bezel and
remove the engraved overlay.
3.
Remove the four #6-32 mounting screws and carefully lean the mini-touch panel
backward to expose the AXlink and RS-232 (optional) wiring.
4.
Disconnect the AXlink and RS-232 4-pin header and remove the mini-touch
panel from the back box or equipment rack.
5.
Flip the mini-touch panel facedown onto a soft cloth and remove the touch
overlay's ribbon cable connector and backlight connector from the circuit card.
Do not remove the cable on the battery-side of the circuit card. Figure 171 shows
the connectors on the circuit card.
Backlight
connector
4-pin AXlink connector
Touch overlay
ribbon cable
4-pin header connector
Connector side of circuit card
Figure 171
Mini-touch panel circuit card
and connectors
Summary of Contents for AXM-MLC
