![background image](http://html1.mh-extra.com/html/amx/axm-mlc/axm-mlc_instruction-manual_2939200016.webp)
8
Installing the Mini-Touch Panel
Black/White LCD Mini-Touch Panels
RADIUS IN CORNERS
.125 [3.2 MM] MAX
CUTOUT
.187 [4.7 MM] DIA
4 HOLES
TWO .170 [4.3 MM] DIA HOLES PROVIDED ON
ALL SIDES OF BACK BOX FOR STUD MOUNTING.
STUD MOUNTING OPTION:
2.94
1.70
1.70
.125
4.25
[114.3 MM]
7.10
7.46
7.80
[208.0 MM]
.35
.170
.52
3.22
(FRAME)
(FRAME)
[74.7 MM]
[4.3 MM]
[8.9 MM]
[180.3 MM]
[189.5 MM]
[198.1 MM]
8.187
[43.2 MM]
[43.2 MM]
[108.0 MM]
4.50
[13.2 MM]
[81.8 MM]
[3.2 MM]
3.
Lay the AXU-MLC (/PB) facedown onto a soft cloth and remove the four screws
from the low profile back box. Remove the back box and discard.
4.
Place the BB-MTP into the cutout and mark the threaded insert positions as
shown in Figure 7.
5.
Remove the BB-MTP and drill eight holes as shown in Figure 6. Then, place #6-
32 threaded inserts into the four holes marked ‘B’ in the cutout dimensions
illustration.
6.
Disconnect the AXlink connector from the AMX control system that supplies
power and data to the AXU-MLC (/PB). Then, disconnect the optional RS-232
connector from the external RS-232 device connected to the AXU-MLC (/PB).
7.
Remove one or more knockouts to accommodate the wiring as required.
Figure 7
AXU-MLC (/PB) and BB-MTP
cutout dimensions
Note
The BB-MTP can also be
mounted to wood or metal
studs using the pre-drilled stud
mounting holes.
Summary of Contents for AXM-MLC
