![background image](http://html1.mh-extra.com/html/amx/axm-mlc/axm-mlc_instruction-manual_2939200020.webp)
12
Installing the Mini-Touch Panel
Black/White LCD Mini-Touch Panels
3.
Connect the AXlink and RS-232 wiring to the AXM-MLC circuit card. Refer to
Wiring the Mini-Touch Panel
for complete wiring information.
4.
Insert the AXM-MLC into the rack. Line up the top left and right screw holes
and start the #6-32 screws. Then, start the bottom left and right screws. Tighten
all the screws after you start all the screws.
5.
Connect the AXlink wiring to the AMX control system and RS-232 wiring to the
external RS-232 device. The AXM-MLC will beep when you apply power.
AXW-MLC (/PB) (wood enclosure)
Install the AXW-MLC (/PB) ( Figure 11) wood enclosure:
1.
Thread the incoming AXlink cable to the AXW-MLC (/PB).
2.
Disconnect the AXlink connector from the AMX control system that supplies
power and data to the AXW-MLC (/PB).
3.
Connect the mini-XLR connector to the AXW-MLC (/PB). Refer to
Wiring the
Mini-Touch Panel
for complete wiring information.
4.
Connect the AXlink wiring to the AMX control system. The AXW-MLC (/PB)
will beep when you apply power.
Figure 11
AXW-MLC (/PB) wood
enclosure
Summary of Contents for AXM-MLC
