![background image](http://html1.mh-extra.com/html/amx/axm-mlc/axm-mlc_instruction-manual_2939200015.webp)
Black/White LCD Mini-Touch Panels
Installing the Mini-Touch Panel
7
6.
Fasten the AXU-MLC (/PB) and low profile back box to the surface using the
#6-32 machine screws supplied with the enclosure.
7.
Insert the engraved overlay back into the bezel.
8.
Connect the AXlink wiring to the AMX control system, and RS-232 wiring
(optional) to the external RS-232 device. The AXU-MLC (/PB) will beep when
you apply power.
AXU-MLC (/PB) and BB-MTP (solid surfaces)
Mount the AXU-MLC (/PB) and BB-MTP ( Figure 6) into a solid surface:
Release slot
Solid surface mounting
flanges
Knockout
BB-MTP UniMount enclosure
AXU-MLC bezel
Engraved overlay
Stud mounting
holes
1.
Cut the solid surface according to the cutout dimensions shown in Figure 7.
2.
Insert a flat head screwdriver into the release slot on the AXU-MLC (/PB)’s
bezel and remove the engraved overlay.
Note
The mini-touch panel must
always be installed with the
release slot located at the
bottom.
Figure 6
AXU-MLC (/PB) and BB-MTP
UniMount enclosure for solid
surfaces
Summary of Contents for AXM-MLC
