manualshive.com logo in svg

AMX AXM-MLC, Instruction Manual

Share
Download
AMX AXM-MLC Instruction Manual Download Page 125

Black/White LCD Mini-Touch Panels

Replacing the Lithium Batteries

117

Replacing the Lithium Batteries

Overview

There are two lithium batteries ( Figure 169) on the mini-touch panel circuit card,
with a life of approximately 5 years. They protect stored commands and pages
against power loss. The batteries are not used when DC power is supplied to the
mini-touch panel. You should write down the replacement date on a sticker or label
by adding 5 years to the date of installation, and then attach it to the mini-touch
panel for future reference.

Lithium battery

Socket

Contact your AMX dealer before you replace the lithium batteries and verify that
they have a current copy of the pages stored in the touch panel. This will avoid any
inadvertent loss of data or a service outage. To replace the lithium batteries, you will
need a Phillips screwdriver and a non-conducting flat-blade tool to slip under each
battery to pry it up and out of the socket.

AXT-MLC (/PB)

Remove the lithium batteries from the AXT-MLC (/PB):

1. 

Discharge the static electricity from your body by touching a grounded object.

2. 

Remove the mini-XLR AXlink connector from the rear side of the mini-touch
panel.

Figure 169

Lithium battery and socket

Caution  

Static electricity can damage

electronic circuitry. Before

removing the touch panel

circuit card from the enclosure,

discharge any accumulated

static electricity from your body

and flat-blade tool by touching

a grounded metal object.

Summary of Contents for AXM-MLC

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands