AMO Catalys OptiMedica Operator'S Manual Download Page 138

Page: 138 / 314

Chapter 3 Software Navigation

Page 138 of 314

Part Number: 0160-6411, Rev A, 02/2019

Software Release: cOS 5.00

INTEGRAL GUIDANCE

System Dimensions

You can toggle the

INTEGRAL GUIDANCE

System dimensions on/off by pressing the button at

the bottom left of the Surface Mapping Review Screen. The

INTEGRAL GUIDANCE

System

dimensions display the distance between the color-coded surface maps. As the surface maps are
moved, either by

INTEGRAL GUIDANCE

System imaging or the user, the numeric value of the

distance between the surface maps is displayed and updated.

Figure 3.94 Location of

INTEGRAL GUIDANCE

System Dimensions

The following measurements are taken along a vector orthogonal to the tilt of the lens:

• CCT (central cornea thickness)—distance between anterior and posterior cornea

• AD (aqueous depth)—distance between posterior cornea and anterior lens

• ACD (anterior chamber depth)—distance between anterior cornea and anterior lens

• LMP (lens meridian position)—distance from anterior cornea to lens equator (i.e.,

intersection of lens anterior and lens posterior surface maps)

• LT (lens thickness)—distance from lens anterior to lens posterior

• PD (pupil diameter)—pupil diameter including minor and major axis

• WTW (white to white)—limbus diameter including minor and major axis

Summary of Contents for Catalys OptiMedica



























































































































































































































































































































Search results

Summary of Contents for Catalys OptiMedica

Reviews:

Brands by name

Popular brands

AMO Catalys OptiMedica, Operator'S Manual

Search results

Summary of Contents for Catalys OptiMedica

Reviews:

Brands by name

Popular brands