Ametek Thermox Series 2000 WDG-IV, User Manual

Page: 11 / 193

Contents | xi
General Safety Summary
Review the following safety precautions to avoid injury and prevent damage
to this product or any products connected to it.
Use Proper Wiring
To avoid fire hazards, use only the wiring specified in the Installation Chapter
of this user’s manual.
Avoid Electrical Overload
To avoid electrical shock or fire hazard, do not apply a voltage to a terminal that
is outside the range specified for that terminal.
Ground the Product
Follow the grounding instructions provided in the Installation Chapter of this
user’s manual. Before making connections to the input or output terminals of
this product, ensure that the product is properly grounded.
Do Not Operate without Covers
To avoid electric shock or fire hazard, do not operate this product with covers
or panels removed.
Use Proper Fuse
To avoid fire hazard, use only the fuse type and rating specified for this prod-
uct.
Do Not Operate in Explosive Atmosphere
To avoid injury or fire hazard, do not operate this product in an explosive at-
mosphere unless you have purchased options that are specifically designed for
these environments.
Product Damage Precautions
Use Proper Power Source
Do not operate this product from a power source that applies more than the
voltage specified.
Do Not Operate with Suspected Failures
If you suspect there is damage to this product, have it inspected by qualified
service personnel.