AMCI SV160E2, User Manual, Page: 95 / 120

20 Gear Drive, Plymouth Ind. Park, Terryville, CT 06786

Tel: (860) 585-1254 Fax: (860) 584-1973 http://www.amci.com
SV160E2 User Manual
S
ET THE
IP A
DDRESS AND
P
ROTOCOL
95
2.2c Use the AMCI Net Configurator Utility (continued)
2.2c.6 Press the [SCAN] button and Connect to the SV160E2
Pressing the [Scan] button will open the window shown in figure T2.5. Note that scanning for the SV160E2
will only work when the unit and your network interface are on the same subnet. Optionally, you can press the
[Manual Connect] button and enter the IP address of the unit.
Figure T2.5 Scan for SV160E2
If scanning for the SV160E2, click on the IP Address of the unit and click on the [Connect] button. The Net
Configurator utility will connect to the unit.
2.2c.7 Click on the "Allow IP..." Checkbox to Access the IP Settings
Figure T2.6 below shows the screen that results when you are connected to the SV160E2. In order to change
the IP Address of the unit, you must first click on the checkbox next to the text “Allow IP configuration
changes. You will need to restart the device.” Once the checkbox is selected, the [Set IP Address] and proto-
col select buttons will be enabled.
Figure T2.6 Enable IP Address Changes