Alvarion BreezeACCESS SU-A-EZ, Product Manual

Page: 114 / 165

Chapter 5 - Command Line Interface File Commands
BreezeACCESS SU-A-EZ 97 Product Manual
5.7.12 get interface
This command displays the interface information for all connections.
Syntax
get interface < all | br0 | lo >
• all - Use to display all parameters for this command.
• br0 - Displays interface information about the SU-A-EZ.
• lo - Displays loopback interface information.
Default Setting
None
Command Mode
Installer, Admin
Example 1
Example 2
5.7.13 get system
This command displays detailed hardware and software information for the
system.
Syntax
get system < detail | model | bversion | version | platform >
• detail - Use to display all parameters for this command.
• model - The SU-A-EZ model number.
• bversion - The boot code version number.
• version - The software version number.
• platform - The design version for integrating software and hardware.
• When no parameter is specified, the default admin password will be displayed (if
it is still in use). If the admin password is to be changed after reboot, this
command will not display anything.
Installer# get interface all
name type status mac ip mask
---------------------------------------------------------------
br0 bridge up 00:10:E7:02:15:5D 10.0.0.1 255.0.0.0
lo loopback up 00:00:00:00:00:00 127.0.0.1 255.0.0.0
Installer#
Installer# get interface lo
Property Value
---------------------------
type loopback
status up
mac 00:00:00:00:00:00
ip 127.0.0.1
mask 255.0.0.0
Installer#