Alvarion BreezeACCESS SU-A-EZ, Product Manual

Page: 76 / 165

Chapter 4 - Web-managed Configuration Wireless Settings
BreezeACCESS SU-A-EZ 59 Product Manual
up. When the Threshold mode is enabled, a table is displayed, allowing users
to set thresholds for each LED:
»
Type - Indicates the parameter that is monitored and that the threshold is
set for:
◊ Disabled - The LED is always off
◊ RSSI - Sets up a threshold for the Received Signal Strength Indication
◊ CRC - Sets up a threshold for the Cyclic Redundancy Check percentage
◊ SNR - Sets up a threshold for the Signal-to-Noise Ratio
◊ Modulation - Sets up a threshold for the average modulation
»
Mode - Defines how the threshold parameter relates to the threshold target
◊ lower than or equal to - The threshold parameter must be lower than
or equal to the threshold target value for the LED to light up.
◊
greater than or equal to - The threshold parameter must be greater
than or equal to the threshold target value for the LED to light up.
◊ equal to - The threshold parameter must be equal to the threshold
target value for the LED to light up.
»
Target - Defines the threshold target values. Depending on the threshold
type, the following value ranges apply:
If all the thresholds that were set up are reached, the entire SNR bar will light
up. For instance if LEDs 2, 5 and 6 have thresholds set for them (the rest of
the SNR LEDs are disabled) and all these thresholds are reached, instead of
having only LEDs 2, 5 and 6 light up, all the SNR LEDs will light up.
Table 4-1: Threshold Target Value Ranges
Threshold Type Value Range
RSSI -108...0
CRC 0...100
SNR 0...80
Modulation 1...8