Alvarion BreezeACCESS SU-A-EZ, Product Manual

Page: 129 / 165

Chapter 5 - Command Line Interface Wireless Commands
BreezeACCESS SU-A-EZ 112 Product Manual
5.10.7 set ClientSta linkrate
This command sets the maximum data rate at which the SU-A-EZ transmits
unicast packets on the wireless interface. The maximum transmission distance is
affected by the data rate. The lower the data rate, the longer the transmission
distance.
Syntax
set ClientSta linkrate < linkrate >
• linkrate - May be set to 6, 9, 12, 18, 24, 36, 48 or 54 Mbps.
Default Setting
54 Mbps
Command Mode
Installer, Admin
Example
5.10.8 set ClientSta mangVLAN
This command configures the management VLAN ID. The management VLAN is
for managing the SU-A-EZ. The data traffic is bridged transparently regardless of
this setting.
Syntax
set ClientSta mangVLAN < VLAN ID >
• VLAN ID - Range 0, or 1~4094. 0 implies that the management VLAN is disabled.
Default Setting
Disabled
Command Mode
Installer, Admin
Example
Installer# set ClientSta linkrate 6
Installer#
Installer# set ClientSta mangVLAN 4094
Installer#