Chapter 4 - Web-managed Configuration
Wireless Settings
BreezeACCESS SU-A-EZ
56
Product Manual
All Ports (RTP and RTCP)
- Both RTP (Real Time Protocol) and RTCP (Real
Time Control Protocol) traffic is prioritized.
Even Ports (RTP only)
- Only RTP (Real Time Protocol) traffic is prioritized.
The default value is All Ports (RTP and RTCP).
UDP Port Ranges
– Defines priority port ranges for UDP traffic. You can enter a
list of up to 64 port numbers and/or ranges. Use hyphens to separate start/end
port numbers within a range. Use commas to separate entries.
Example: 9800,9000-9007,9010,9022-9036
TCP Port Ranges
– Defines priority port ranges for TCP traffic. You can enter a
list of up to 64 port numbers and/or ranges. Use hyphens to separate start/end
port numbers within a range. Use commas to separate entries.
Example: 9800,9000-9007,9010,9022-9036
IP Range Option
– This option prioritizes frames with source/destination IP
address matching the predefined IP range. The available settings are:
Disable
- IP Range Prioritization is disabled.
Source IP
- Frames with matching source IP addresses are prioritized.
Destination IP
- Frames with matching destination IP addresses are
prioritized.
Source or Destination IP
- Frames with matching source or destination IP
address are prioritized.
The default value is Disable.
IP Range Start Address
– IP address which, in conjunction with the IP range
mask, defines the IP Range used for prioritization (Range: 4 groups of up to 3
digits separated by dots, Default: 0.0.0.0).
IP Range Mask
– IP mask which, in conjunction with the IP range start address,
defines the IP Range used for prioritization (Range: 4 groups of up to 3 digits
separated by dots, Default: 255.0.0.0).
Regulatory Domain
– The regulatory domain for the SU-A-EZ is preset for the
country of intended operation and may only be configured through the CLI, (see
“Regulatory Domain Commands” on page 84
.) Within the allowed domain for your
country of operation you may limit transmission on certain band frequencies by
Summary of Contents for BreezeACCESS SU-A-EZ
