Alvarion BreezeACCESS SU-A-EZ, Product Manual

Page: 116 / 165

Chapter 5 - Command Line Interface File Commands
BreezeACCESS SU-A-EZ 99 Product Manual
5.7.14 get ClientSta
This command allows you to display detailed information about the SU-A-EZ.
Syntax
get ClientSta < detail | status-update | wireless-essid | authentication |
security-mode
| data-encryption-option | wep-key-input | wep-key-type |
default-key | key-1 | key-2 | key-3 | key-4 | rtsthreshold | modulation | linkrate
| bridge-static-ip | bridge-mip | default-gw | regdomain | total-channel |
dfs-radar-status
| mangVLAN | txpowerlevel |
MirDownlink
|
MirUplink
|
CirDownlink
|
CirUplink
|
CirDelay
|
BurstDuration
|
MinContentionWindow
|
MaxContentionWindow
|
AIFS
|
burstTime
|
HardwareRetries
|
PreferredAuMacAddress
| distance | dhcp | dhcpc |
snmp-rocommunity |
EthernetLinkType
|
VlanDataID
|
VlanDataPriority
|
VlanPriorityThreshold
|
ToSPrioritizationOption
|
IPToSPrecedenceThreshold
|
DSCPThreshold
|
UdpTcpPortRangesPrioOpt
|
UdpPortPriRtpRtcp
|
TcpPortPriRtpRtcp
|
UdpPortRanges
|
TcpPortRanges
|
IpRangeOption
|
IpRangeAddress
|
IpRangeMask
|
SuName
|
bandwidth
|
dfsOption
|
dfsChannelCheckTime
|
dfsChannelAvoidancePeriod
|
dfsClearRadarDetectedChannels
|
dfsMinimumPulseToDetect
|
dfsDetectionAlgorithm
|
led1Type
|
led1Mode
|
led1Target
|
led2Type
|
led2Mode
|
led2Target
|
led3Type
|
led3Mode
|
led3Target
|
led4Type
|
led4Mode
|
led4Target
|
led5Type
|
led5Mode
|
led5Target
|
led6Type
|
led6Mode
|
led6Target
|
led7Type
|
led7Mode
|
led7Target
>
• detail - Use to display all parameters for this command.
• status-update - Notifies the user if a system status update has been recorded.
• wireless-essid - Displays the service set identifier used to identify wireless traffic.
• authentication - Displays the type of authentication used.
• security-mode - Displays the encryption algorithm used when the
data-encryption-option is activated
• data-encryption-option - Notifies the user if data encryption is being used on
transmitting data.
• wep-key-input - Displays if WEP security is being used.
• wep-key-type - Displays the type of WEP security being used, if any.
• default-key - Displays the default WEP key.
• key-1 ~ key-4 - Displays the WEP key value.
• rtsthreshold - Displays the set packet size threshold after which an RTS packet must
be sent.
• modulation - Displays the method at which data is being transferred in relation to the
linkrate, fixed or dynamic (limited).
• linkrate - Displays the maximum data rate at which the SU-A-EZ can transmit data.
• bridge-static-ip - Displays the IP address of the SU-A-EZ.
• bridge-mip - Displays the subnet mask for the Ethernet connection.
• default-gw - Displays the default gateway for the Ethernet connection.
• regdomain - Displays the chosen regulatory domain. (Only in installer mode)
• total-channel - Displays the number of channels of bandwidth enabled within the
chosen regulatory domain.
•
dfs-radar-status
- Displays a table indicating the radar detection status for each
channel
• mangVLAN - Displays the ID of the management VLAN.
• txpowerlevel - Displays the transmission power level in relation to maximum
capabilities.
• MirDownlink - Displays the Maximum Information Rate of the downlink from the AU
to the SU