Alvarion BreezeACCESS SU-A-EZ, Product Manual, Page: 33 / 165

Chapter 2 - Hardware Installation ODU Hardware Description
BreezeACCESS SU-A-EZ 16 Product Manual
The three pairs of the 11a LEDs display the received signal strength and can be
used for aligning antennas in the wireless link.
The following table describes the wireless status LEDs:
Link On Green Indicates a valid 10/100 Mbps Ethernet cable link.
Flashing Green Indicates that the SU-A-EZ is transmitting or receiving data
on a 10/100 Mbps Ethernet LAN. Flashing rate is
proportional to network activity.
11a LEDs Status Description
Right Pair Center Pair Left Pair
Off Off Off The radio is disabled or unit is still booting up
Blinking-
slowly Off Off No signal detected or RSSI is below -88 dBm
Blinking-
fast Off Off RSSI is between -88 dBm and -87 dBm
Blinking-
very fast Off Off RSSI is between -86 dBm and -85 dBm
On Off Off RSSI is between -84 dBm and -82 dBm
On Blinking-
slowly Off RSSI is between -81 dBm and -80 dBm
On Blinking-
fast Off RSSI is between -79 dBm and -78 dBm
On Blinking-
very fast Off RSSI is between -77 dBm and -76dBm
On On Off RSSI is between -75 dBm and -74 dBm
On On Blinking-
slowly RSSI is between -73 dBm and -72 dBm
On On Blinking-
fast RSSI is between -71 dBm and -70 dBm
On On Blinking-
very fast RSSI is between -69 dBm and -68 dBm
On On On RSSI is over -67dBm
LED Status Description