Alvarion BreezeACCESS SU-A-EZ, Product Manual

Page: 59 / 165

Chapter 4 - Web-managed Configuration Introduction
BreezeACCESS SU-A-EZ 42 Product Manual
Transmit Power
Level
Configures the radio transmit power
50
Modulation Type
and Link Rate
Specifies the modulation type and configures the maximum rate for sending data.
50
MIR uplink Sets the Maximum Information Rate of the uplink from the SU to the AU
50
MIR downlink Sets the Maximum Information Rate of the downlink from the AU to the SU
50
CIR uplink Sets the Committed Information Rate of the uplink from the SU to the AU
50
CIR downlink Sets the Committed Information Rate of the downlink from the AU to the SU
50
CIR delay Sets the Maximum delay time introduced by the CIR\MIR buffering mechanism
51
Burst duration Sets the maximum duration for the initial uninterrupted burst of data sent after a
period of inactivity
51
Min Contention
Window
Sets the initial (lowest) minimal value for the additional timeslots employed by the
back-off algorithm
51
Max Contention
Window
Sets the final (highest) maximal value for the additional timeslots employed by the
back-off algorithm
52
AIFS Defines the Arbitration Inter-Frame Spacing number of time slots
52
Burst Time (ms) Defines the burst size
53
Hardware Retries Sets the maximum number of times that an unacknowledged frame is
retransmitted in each Hardware Retrial phase
53
Preferred AU
MAC Address
Sets the preferred AU
53
RF Distance (Km) Configures the maximum distance of the cell
53
VLAN Support
Mode (Link Type)
Chooses between Access and Hybrid VLAN link types
54
VLAN Tag For
Data Frames
Sets the VLAN ID tag
54
Priority Tagging
For Data Frames
Sets the VLAN priority tag
54
VLAN Priority
Threshold
Sets up a VLAN based threshold for allocating packets to either the High Priority
or the Low Priority queue.
54
ToS Prioritization
Option
Sets up the ToS based prioritization for the High/Low priority queues
54
IP ToS
Precedence
Threshold
Sets up the threshold for IP Precedence based ToS prioritization (RFC791)
55
DSCP Threshold Sets up the threshold for DSCP based ToS prioritization (RFC2474)
55
UDP/TCP Port
Ranges
Prioritization
Defines prioritization in accordance with UDP and/or TCP destination port
ranges.
55
Menu Description Page