Alvarion BreezeACCESS SU-A-EZ, Product Manual

Page: 142 / 165

Chapter 5 - Command Line Interface MIR/CIR Commands
BreezeACCESS SU-A-EZ 125 Product Manual
5.13 MIR/CIR Commands
The commands described in this section configure parameters that handle the
SU’s throughput settings.
Table 5-11: MIR/CIR Commands
5.13.1 set ClientSta MirDownlink
This command sets the Maximum Information Rate of the downlink from the AU
to the SU.
Syntax
set ClientSta MirDownlink < MIR downlink >
• MIR downlink - The MIR in Kbps of the downlink from the AU to the SU. (Range:
multiples of 128 up to 12032)
Default Setting
Maximum downlink rate supported by the unit’s license.
Command Mode
Installer, Admin
Example
5.13.2 set ClientSta MirUplink
This command sets the Maximum Information Rate of the uplink from the SU to
the AU
Command Function Mode Page
set ClientSta
MirDownlink Sets the Maximum Information Rate of the downlink from the AU to
the SU Installer,
Admin
125
set ClientSta
MirUplink Sets the Maximum Information Rate of the uplink from the SU to the
AU Installer,
Admin
125
set ClientSta
CirDownlink Sets the Committed Information Rate of the downlink from the AU
to the SU Installer,
Admin
126
set ClientSta
CirUplink Sets the Committed Information Rate of the uplink from the SU to
the AU Installer,
Admin
126
set ClientSta
BurstDuration Sets the maximum duration for the initial uninterrupted burst of data
sent after a period of inactivity Installer,
Admin
127
Installer# set ClientSta MirDownlink 1920
Installer#