Altigen IP 710 Administration Manual Download

Page: 17 / 75

IP 710 Manual

H A P T E R

System & Network Requirements

System Requirements

• AltiWare OE 5.0A Update 3 or higher

Note:

A lower version of AltiWare may cause the IP phone to lose
several advanced features, resulting in use as a basic H.323
phone.

• AltiGen OE 5.0A GateKeeper or higher (to support plug and play

functionality)

Network Requirements

• Network connection — the IP phone must have TCP/IP connection to

the related AltiWare system

Important:

Make sure an Ethernet switch is used, rather than a hub,

in the corporate LAN. An Ethernet switch with QoS
support is preferred.

• DHCP Server (to get an IP address dynamically, when necessary)

• TFTP Server (to update the IP phone firmware, when necessary)

• GateKeeper (for plug and play feature)

AltiAdmin/ACM Admin Configuration

Requirements

• The IP 710 requires an IP extension to be enabled in AltiAdmin to

handle call processing. Refer to the “Setting Up IP Extensions” chapter
in the

AltiWare OE/ACC System Installation & Administration

Manual

ACM System Administration Manual

for detailed

instructions on how to set up an IP extension to manage the IP phone.

• The IP phone settings must be pre-configured in AltiAdmin/ACM

Admin before setting up configuration for the IP 710.

Summary of Contents for IP 710












































































Search results

Summary of Contents for IP 710

Reviews:

Related manuals for IP 710

Brands by name

Popular brands

Altigen IP 710, Administration Manual

Search results

Summary of Contents for IP 710

Reviews:

Related manuals for IP 710

Brands by name

Popular brands