IP 710 Manual
28
Important:
When updating the IP 710 phone’s firmware, it is
recommended that administrators perform any updates
after
normal business hours or when the IP phone is not in use. If
the IP 710 phone is in use during an update, the call will be
disconnected.
If the IP 710 phone is registered with AltiServ, to update the phone
firmware from AltiAdmin, do the following:
1. Launch IP Phone Configuration in AltiAdmin Main Menu.
2. Set the TFTP Server address.
3. Select
Boot Download
and
Reset IP Phone
check boxes, then click
Apply
.
4. The IP 710 should reboot and download the image from the specified
TFTP server.
To update the phone firmware directly from the IP 710 phone, follow these
steps:
1. Press the
Menu
button.
2. Use the
button to scroll to
System
, then
press the
Enter
button.
3. Scroll to
TFTP Server
, then press
Enter
.
4. Enter the TFTP server address, using the * key to input periods.
5. The IP 710 will download the firmware from the TFTP server on the
next reboot.
6. Reboot by unplugging and replugging the power cable OR by
pressing * *
3
and the
Enter
button.
7. Once the IP phone is rebooted, all LED lights come on for a brief
time.
8. The LCD screen displays [
BOOTING
] on the first line.
9. On the second line of the LCD screen, the following messages are
displayed in succession:
—
CHECK MEMORY
(RAM checking state)
—
CHECK FW
(Firmware checking state)
—
INIT NETWORK
—
LOADING FW..
.
—
LOADING NOW
.
Summary of Contents for IP 710
