Altigen IP 710, Administration Manual

Page: 21 / 75

IP 710 Manual 11
This opens the IP Phone Configuration window:
The left side of the IP Phone Configuration window displays all the
IP phones that have been set up in the system. The following table
describes the parameters on the General tab:
Parameter Description
General
Info Lets you specify the IP address of the AltiServ system
the IP 710 phone is connected to. The version of
software associated with AltiServ is automatically
displayed in the
Version field.
To allow the extension user to have password-
protected configuration functionality from the phone
itself, check the
Enable Configure Password check
box and assign a numerical password. When the
extension user attempts to configure features, the user
will need to enter the assigned password to proceed.
H.323 Lets you set the Jitter Buffer— the delay used to
buffer voice packets received from the IP network—in
milliseconds. The Jitter Buffer should be adjusted
according to the WAN bandwidth allocated to data
traffic.
To allow NAT support for the IP extension, check the
Enable NAT check box.