Altigen IP 710 Administration Manual Download

Page: 24 / 75

IP 710 Manual

Parameter

Description

Soft Keys
1 - 15

Corresponds to the 15 soft keys on the IP 710. Use the
drop-down list to assign one of the following functions
to the desired keys:

•

N/A

- when selected, the corresponding soft key

cannot be used.

•

BLF

(Busy Lamp Field) - when selected, enter an

extension number in the field below; this will be
associated with the corresponding soft key to
automatically dial this extension number; the light
in this soft key indicates that the extension number
is busy. You can select the

Play Tone

check box to

also have the IP phone play an audible beep or one
of 14 different ring tones when the extension
number is ringing.

Note

: The

BLF

feature can be assigned only to

internal

extension numbers, not outside

numbers.

•

Feature Code

- when selected, enter an AltiServ

feature code in the field below; this will be
associated with the corresponding soft key to dial
this feature code.

•

Speed Dial

- when selected, enter the speed dial

code in the field below; this will be associated with
the corresponding soft key to dial this speed dial
code.

•

Line Park

- when selected, use the drop-down list

to select the desired

Line Park

line ID.

Summary of Contents for IP 710












































































Search results

Summary of Contents for IP 710

Reviews:

Related manuals for IP 710

Brands by name

Popular brands

Altigen IP 710, Administration Manual

Search results

Summary of Contents for IP 710

Reviews:

Related manuals for IP 710

Brands by name

Popular brands