Altigen IP 710, Administration Manual

Page: 69 / 75

Appendix A
IP 710 Manual 59
Redial Phone is onhook
1) Press the Redial button.
2) Use / to scroll to the desired entry. ( scrolls to previous
entry, scrolls to first entry.)
3) Press the Speaker button or raise handset.
• Redial up to last 16 calls.
• Redial up to 32 digits.
Release For a connected call:
1) Press the Release button to hang up the call.
Also, press the Release button to exit the menu.
Restore
Default
Settings 1) Press the Menu button.
2) Press * * 2 , then the Enter button.
Ring Tones 1) Press the Menu button.
2) Select PHONE SETTING, and scroll to RING TONES.
3) Select a ring tone and press the Enter button.
Soft Key*
•
N/A
•
BLF
•
Feature
Code
• Speed Dial
•
Line Park
•
Call
Record
•
Workgroup
Status
• Phone
Setting
1) Press the appropriate soft key (keys 1-15) to initiate one of
the following functions pre-assigned by the system
administrator: Busy Lamp Field, AltiServ Feature Code,
Speed Dial, Line Park, Call Record, Workgroup Status,
Phone Setting.
To configure a soft key with Phone Setting enabled:
a. Press the Menu button, select PHONE SETTING, and
press the Enter button.
b.
Scroll to PROGRAM KEYS and press Enter .
c.
Select the key to program, and press Enter .
d.
Enter the appropriate digits for the speed dial number or
feature code, and press
Enter .
The digits are automatically dialed when this function key is
pressed.
Speaker To use the speakerphone:
1) Press the Speaker button.
2) To disconnect the call, press the Speaker button again.
Speed Dial* 1) Press the Speed Dial button to see a list of phone numbers
configured by the system administrator.
2) Use / to scroll to the desired entry.
3) Press the Enter button to dial the number.