Altigen IP 710 Administration Manual Download

Page: 19 / 75

IP 710 Manual

H A P T E R

Installation

This chapter describes local installation and remote installation of the
IP 710 phone.

Important Notes for Plug and Play:

The plug and play feature enables the IP 710 phone to automatically
discover the AltiServ IP address.

• To use the plug and play feature, the user’s IP phone must be on the

LAN with AltiServ.

• There can be only one AltiServ on the LAN.

• An instance of AltiGen GateKeeper needs to be running on the LAN

and configured to point to the AltiWare system.

• GateKeeper Auto Discovery uses broadcast UDP packets, which work

in the LAN or VPN environment, but not through the public IP
network.

• The DHCP server must be up and running.

Local Installation

1. Gather network settings information (this information will be needed

to configure the IP 710):

• AltiWare server IP address

If you are not using GateKeeper Auto Discovery – needed for plug
and play – you will have to manually configure the AltiServ IP
address on your IP phones.

• Is DHCP used?

If DHCP is not used, obtain the IP 710 phone’s IP address from the

system administrator.

• Firewall information

See “Firewall Considerations” on page 48, if a firewall is being
used in the AltiWare environment.

Summary of Contents for IP 710












































































Search results

Summary of Contents for IP 710

Reviews:

Related manuals for IP 710

Brands by name

Popular brands

Altigen IP 710, Administration Manual

Search results

Summary of Contents for IP 710

Reviews:

Related manuals for IP 710

Brands by name

Popular brands