Altigen IP 710 Administration Manual Download

Page: 55 / 75

IP 710 Manual

subnet mask

- the method used for splitting IP networks into a series of subgroups,

or subnets. The mask is a binary pattern that is matched up with the IP address to
turn part of the host ID address field into a field for subnets.

System Speed Dialing

- this feature allows the user to access a list of commonly

called phone numbers entered into the system by the administrator. The user presses
the

SpeedDial

button on the phone, selects a number from the list, and then dials by

pressing the

Enter

button.

TCP/IP

Transmission Control Protocol/Internet Protocol. A full set of protocols

used on the Internet.

TDM

- Time Division Multiplexing.

TFTP (Trivial File Transfer Protocol)

- a version of the TCP/IP FTP protocol that

has no directory or password capability.

transfer

- this feature redirects a call to another extension,

the AltiGen Voice

Mail System

, or operator.

UDP (User Datagram Protocol)

- a communications protocol that offers a limited

amount of service when messages are exchanged between computers in a network
that uses the Internet Protocol.

URL (Uniform Resource Locator)

- the address that defines the route to a file on

the web or any other Internet facility.

user(s) -

the person or persons accessing the features and functions of the AltiWare

product.

virtual extension

- an extension not associated with a physical port that allows for

guest access to

the AltiGen Voice Mail System

features and telephone sharing

environments. Users of a virtual extension have to log in before accessing the
system features assigned to it.

VoIP

- voice over Internet Protocol (IP). The technology used to transmit voice

conversations over a data network using

the

Internet Protocol.

Summary of Contents for IP 710












































































Search results

Summary of Contents for IP 710

Reviews:

Related manuals for IP 710

Brands by name

Popular brands

Altigen IP 710, Administration Manual

Search results

Summary of Contents for IP 710

Reviews:

Related manuals for IP 710

Brands by name

Popular brands