Altigen IP 710, Administration Manual

Page: 22 / 75

IP 710 Manual 12
Note: The Apply To button works with the following parameters:
General, H.323, TFTP (Server field only; Reset IP Phone and
Boot Download options cannot be applied to multiple
extensions), and Debug. This works only when the IP 710 is
operating in Basic mode.
Time
Display • Offset - a per phone-based configuration, allows
the phone to display a different time, based on
location.
• Format - a per-phone-based configuration, allows
the phone to display 24 hour or 12 hour (AM/PM).
Trunk
Access
Code • Lets you set the digit required to enable a user to
return an outside call from the Call Log.
• The default trunk access code is the route access
code, if it is set in AltiAdmin/ACM Admin.
• This setting also appears on the phone’s
SYSTEM
menu.
TFTP Lets you assign the TFTP Server to which the IP phone
can connect for updating firmware when necessary.
Enter the IP address of the TFTP Server in the
Server
field.
To update IP phone image, the administrator can
check the
Reset IP Phone and Boot Download check
box options to reset and download image to update the
phone.
Debug When enabled, allows the IP 710 phone to connect to
Telnet for debugging.
Parameter Description