Alstom FKG1X, Instruction Manual

Page: 92 / 274

Packaging -- Shipping and storage
Packaging -- Identification -- Storage
S22--001EN05
3/6
02--2011
© ALSTOM 2010. All rights reserved. Information contained in this document is indicative only. No representation or warranty is given or should be
relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is
provided without liability and is subject to change without notice. Reproduction, use or disclosure to third parties, without express written authority, is
strictly prohibited.
GRID
Identifying sub --assemblies and their packaging
Introduction
Each circuit--breaker sub--assembly (poles, operating mechanism, etc.) is
identified by a plate giving its reference numbers.
These numbers are marked on the packaging cases of each sub--assembly.
Example of marking
and identifying
-- Manufacturer reference No. = 100 928
-- Circuit--breaker identification No. 1
-- Pole No. 1
100 928 0010
01 01
100 928 0010
n
o
SÉRIE
Rep. 1
MARKING OF
PACKAGING CASES
IDENTIFICATION OF SUB--AS-
SEMBLIES AND TOOLING
CIRCUIT--BREAKER
IDENTIFICATION No.
MANUFACTURER
REFERENCE No.
CASE No.
1