Alstom FKG1X, Instruction Manual

Page: 100 / 274

Installation
Bolting and Tightening torques
S31--001EN05
1/4
02--2011
© ALSTOM 2010. All rights reserved. Information contained in this document is indicative only. No representation or warranty is given or should be
relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is
provided without liability and is subject to change without notice. Reproduction, use or disclosure to third parties, without express written authority, is
strictly prohibited.
GRID
Presentation
Introduction
In the assembling with screws, all the fastening screws must be “greased” be-
fore torque tightening.
Products used
The table below gives the list of theused products for thescrews before tight-
ening :
Designation ALSTOM item
reference
Supplier Supplier item
reference
Grease
--01835208
(1kg box)
MOBIL OIL MOBILPLEX 47
Contact Grease
--01835104
(1kg box)
NEUTRAL
VASELINE
Contact grease
--01835118
(200g tube)
EPMF
CONTACTAL
HPG
Silicon grease
--01835265
(100g tube)
SAMARO MOLYKOTE 111
Glue
--01818327
(250ml)
LOCTITE LOCTITE 225
In this module
This module contains the following topics :
Topic Page
Screw greasing before tightening 2
Tightening torques values 3