Alpinestars Tech-Air, User Manual

Page: 15 / 210

13. Display Indications
The LED Display (11) has three coloured LEDs which are used to monitor indicate the status of
the system.
Indications During Use
14. Cleaning, Storage and Transportation
Airbag Vest Cleaning
Use only a cloth dampened with water to clean the airbag vest (fabric and plastic parts).
Solvents or chemical cleaners must not be used, as they may compromise the integrity of
the airbag.
WARNING! Under NO circumstances should the airbag Vest be washed in
a washing machine, submerged in water, tumble dried or ironed. This may
cause permanent damage to the airbag system and cause malfunction.
IMPORTANT!
This indication
At any time means there is a
fault and the system will not
deploy in an accident.
Off On Slow
Blink
Battery Level
Under 2 hours
Standby mode (Disarmed) - Two charges Standby mode (Disarmed) - One charge
Running mode (Armed) - Two charges Running mode (Armed) - One charge
2 to 8 hrs over 8 hrs
Fast
Blink
Turn On
Turn Off
3s
5s
5s
5s
5s
5s
Tip: With a single red indication, the red LED will blink a number of times
to indicate the code of the system error for the problem that the system is
experiencing. These codes and the corresponding errors are listed in Section
20, and the errors can also be viewed using the Tech-Air™ Connect software
(Section 17, available from the DATA PORTAL).
IMPORTANT!
The single Green LED indicates that the system is functioning
and will deploy in a crash.
WARNING! A single RED LED or Green LEDs indicate that
the system will NOT Deploy in a crash.
15 EN
RACE