Alpinestars Tech-Air, User Manual

Page: 11 / 210

Figure 6 Figure 7
3. Fold out the second Velcro flap (12) and attach the collar Velcro on the Vest (13) to this
new flap, centering it correctly (Figure 6).
4. Proceed to attach the lower shoulder velcro (15) and upper shoulder velcro (14) to the
corresponding patches inside the suit lining on both the left and right shoulders.
5. Remove the LED display plug from the storage pocket (17) and plug it into the grey socket
(5) (Figure 7).
6. Turn on the Master switch(8). Note that the master switch should remain always on,
except during shipping or storage.
7. Place the rest of the Vest inside the leather suit .
8. Use the yellow zips on the suit (10) and the vest (1) to zip the Vest into the suit.
9. The suit is now ready for use.
11 EN
Vest
Size
Euro
Size
US
Size
User’s Waist to Shoulder Range Suggested Height Range MTF
S 44,46 34,36 37 – 40cm (14.6” – 15.7”) 1.41 – 1.52m (4’7” – 5’0”) <4.5 KN
M 48,50 38,40 40 – 43cm (15.7” – 17.0”) 1.52 – 1.63m (5’0” – 5’4”) <4.5 KN
L 52,54 42,44 43 – 46cm (17.0” – 18.1”) 1.63 – 1.75m (5’4” – 5’9”) <4.5 KN
XL 56,58 46,48 46 – 49cm (18.1” – 19.3”) 1.75 – 1.86m (5’9” – 6’1”) <4.5 KN
2XL 60,62 50,52 49 – 51cm (19.3” – 20.1”) 1.86 – 1.94m (6’1” – 6’4”) <4.5 KN
Tip: If quickly trying only the fit of the garment, steps 5 and 6 can be skipped.
8. Vest Installation
WARNING! The Tech-Air™ Race airbag Vest must ALWAYS be used with an
Alpinestars’ Compatible Suit/Jacket of corresponding and appropriate size.
Use of the airbag vest with the incorrect size of Alpinestars’ Compatible Suit/
Jacket, or a non-compatible Alpinestars’ Compatible Suit/Jacket, may result
in injury, including severe injury and/or death.
To install an airbag vest into a Alpinestars’ Compatible Suit/Jacket:.
1. Remove the all the patches which are attached to the velcro panels on the Vest (13,14,15)
2. Detach the suit lining at the Velcro on the collar.
1
1
2
3
2
List of Compatible Garments
315 5016 GP PRO 1PC LEATHER SUIT TECH AIR COMPATIBLE
RACE