Alloy AS5010-P, User Manual

Page: 364 / 435

AS Series User Manual
363
Doc No.: AS5-0116-01
IPv6 SFM Information
Entries in the MLD SFM Information Table are shown on this page. The MLD SFM (Source-Filtered
Multicast) Information Table also contains the SSM (Source-Specific Multicast) information. This
table is sorted first by VLAN ID, then by group, and then by Port. Different source addresses belong
to the same group are treated as single entry.
Information
To Display the IPv6 SFM information in the web interface:
1. Click Monitor > IPMC > MLD Snooping > IPv6 SFM Information
2. If you want to auto-refresh the information tick the Auto-refresh option.
3. Click Refresh to refresh the IPv6 SFM Information statistics or clear all information when
you click Clear
4. Click << or >> to move to previous or next entry.
Fig: The IPv6 SFM Information
Navigating the MLD SFM Information Table
Each page shows up to 99 entries from the MLD SFM Information table, default being 20, selected
through the "entries per page" input field. When first visited, the web page will show the first 20
entries from the beginning of the MLD SFM Information Table.
The "Start from VLAN", and "group" input fields allow the user to select the starting point in the MLD
SFM Information Table. Clicking the button will update the displayed table starting from that or the
closest next MLD SFM Information Table match. In addition, the two input fields will - upon a button
click - assume the value of the first displayed entry, allowing for continuous refresh with the same
start address.
The will use the last entry of the currently displayed table as a basis for the next lookup. When the
end is reached the text "No more entries" is shown in the displayed table. Use the button to start
over.