Alloy AS5010-P, User Manual

Page: 243 / 435

AS Series User Manual
242
Doc No.: AS5-0116-01
DEI Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1
or 'Any'
SMAC Source MAC address: 24 MS bits (OUI) or 'Any'
DMAC Type Destination MAC type: possible values are unicast(UC),
multicast(MC), broadcast(BC) or 'Any'
Frame Type Frame Type can have any of the following values
1. Any
2. Ethernet
3. LLC
4. NAP
5. IPv4
6. IPv6
NOTE: All frame types are explained below:
1. Any: Allow all types of frames.
2. Ethernet: Ethernet Type Valid Ethernet type can have value within 0x600-
0xFFFF or 'Any', default value is 'Any'.
3. LLC: SSAP Address Valid SSAP(Source Service Access Point) can vary from
0x00 to 0xFF or 'Any', the default value is 'Any' DSAP Address Valid
DSAP(Destination Service Access Point) can vary from 0x00 to 0xFF or 'Any',
the default value is 'Any' Control Address Valid Control Address can vary from
0x00 to 0xFF or 'Any', the default value is 'Any'
4. SNAP : PID Valid PID(a.k.a Ethernet type) can have value within 0x00-0xFFFF
or 'Any', default value is 'Any'
5. IPv4 : Protocol IP protocol number: (0-255, TCP or UDP) or 'Any' Source IP
Specific Source IP address in value/mask format or 'Any'. IP and Mask are in
the format x.y.z.w where x, y, z, and w are decimal numbers between 0 and
255. When Mask is converted to a 32-bit binary string and read from left to
right, all bits following the first zero must also be zero DSCP Diffserv Code
Point value(DSCP): It can be specific value, range of value or 'Any'. DSCP values
are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43
IP Fragment IPv4 frame fragmented option: yes|no|any
Sport Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable
for IP protocol UDP/TCP
Dport Destination TCP/UDP port:(0-65535) or 'Any', specific or port range
applicable for IP protocol UDP/TCP