Alloy AS5010-P, User Manual

Page: 23 / 435

AS Series User Manual
22
Doc No.: AS5-0116-01
also represent a legally valid IPv4 address. For example, ::192.1.2.34.
The field may be left blank if IPv6 operation on the interface is not desired.
IPv6 Mask The IPv6 network mask, in number of bits (prefix length). Valid values are
between 1 and 128 bits for a IPv6 address.
The field may be left blank if IPv6 operation on the interface is not desired.
IP Routes
Delete Select this option to delete an existing IP route.
Network The destination IP network or host address of this route. Valid format is dotted
decimal notation or a valid IPv6 notation. A default route can use the value
0.0.0.0 or IPv6 :: notation.
Mask Length The destination IP network or host mask, in number of bits (prefix length). It
defines how much of a network address that must match, in order to qualify
for this route. Valid values are between 0 and 32 bits respectively 128 for IPv6
routes. Only a default route will have a mask length of 0 (as it will match
anything).
Gateway The IP address of the IP gateway. Valid format is dotted decimal notation or a
valid IPv6 notation. Gateway and Network must be of the same type.
Next Hop VLAN
(Only for IPv6) The VLAN ID (VID) of the specific IPv6 interface associated with the gateway.
The given VID ranges from 1 to 4094 and will be effective only when the
corresponding IPv6 interface is valid.
If the IPv6 gateway address is link-local, it must specify the next hop VLAN for
the gateway.
If the IPv6 gateway address is not link-local, system ignores the next hop VLAN
for the gateway.
Buttons Add Interface - Click to add a new IP interface. A maximum of 8 interfaces is
supported.
Add Route - Click to add a new IP route. A maximum of 32 routes is supported.
Apply – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.