Alloy AS5010-P, User Manual

Page: 101 / 435

AS Series User Manual
100
Doc No.: AS5-0116-01
Parameter Description
Port Physical port of the switch.
Policy ID Select the Policy to apply to this port. The allowed vales are 1 through 8. The
default value is 1.
Action Select whether forwarding is permitted (Permit) or denied (Deny). The default
value is Permit.
Rate Limiter ID Select which rate limiter to apply on this port. The allowed values are Disabled
or the values 1 through 16. The default value is Disabled.
Port Redirect Select which port frames are copied on. The allowed values are Disabled or a
specific port number. The default value is Disabled.
Mirror Specify the mirror operation of this port. The allowed values are:
Enabled: Frames received on the port are mirrored.
Disabled: Frames received on the port are not mirrored. The default value is
"Disabled".
Logging Specify the logging operation of this port. The allowed values are:
Enabled: Frames received on the port are stored in the System Log.
Disabled: Frames received on the port are not logged. The default value is
Disabled. Please note that the System Log memory size and logging rate is
limited.
Shutdown
Specify the port shut down operation of this port. The allowed values are:
Enabled: If a frame is received on the port, the port will be disabled.
Disabled: Port shut down is disabled. The default value is Disabled.
State Used to enable or disable the selected port. The allowed values are:
Enabled: Enables the port and allows packets to be sent and received.
Disabled: Disables the port. The default value is Enabled.
Counter Displays the amount of frames that match this ACE.
Buttons Apply – Click to save changes.
Reset - Click to undo any changes made locally and revert to previously saved
values.