Alloy AS5010-P, User Manual

Page: 57 / 435

AS Series User Manual
56
Doc No.: AS5-0116-01
Access Management
This section is used to limit who can access the management interfaces of the switch. This is set via
IP Address or IP Address range and can be restricted based on the type of connection, including
HTTP/HTTPS, SNMP and Telnet/SSH.
Information
To configure the Security Access Management parameters via the Web Interface:
1. Select Configuration > Security > Switch > Access Management.
2. From the drop down box select to enable or disable the Access Management function.
3. Click on Add New Entry button to allow access to a single IP or an entire IP range.
4. Enter required information including VLAN ID, start and ending IP Address.
5. Select the type of management access you would like to grant/limit access to.
6. Click Apply to confirm your settings change.
Fig. Access Management Configuration
Parameter Description
Mode Used to enable or disable the Access Management function.
VLAN ID Enter the required VLAN ID that will have access to the management.