Alloy AS5010-P User Manual Download Page 58

Page: 58 / 435

AS Series User Manual

Doc No.: AS5-0116-01

Start IP Address

Enter the IP Address that will have access to the management.

End IP Address

If allowing an IP Address range, enter the last IP Address in the range that will
have access to the management.

HTTP/HTTPS

Check this box to allow access to the HTTP/HTTPS management.

SNMP

Check this box to allow access to the SNMP management.

Telnet/SSH

Check this box to allow access to the Telnet/SSH management.

Add New Entry

Click to add a new access management entry.

Delete

Click to Delete the currently configured Access Management entry.

Buttons

Apply – Click to save changes.

Reset- Click to undo any changes made locally and revert to previously saved
values.

Summary of Contents for AS5010-P




















































































































































































































































































































































































































































Search results

Summary of Contents for AS5010-P

Reviews:

Related manuals for AS5010-P

Brands by name

Popular brands

Alloy AS5010-P, User Manual

Search results

Summary of Contents for AS5010-P

Reviews:

Related manuals for AS5010-P

Brands by name

Popular brands