Alloy AS5010-P, User Manual

Page: 84 / 435

AS Series User Manual
83
Doc No.: AS5-0116-01
Event
Configure RMON Event table on this page.
Information
To configure the RMON Event parameters via the Web Interface:
1. Click Configuration > Security > SNMP > RMON> Event
2. Select Add New Entry to add a new Entry
3. Specify the ID Parameters
4. Click Apply to Save or Reset to revert unsaved settings.
Fig: The RMON Event Configuration
Parameter Description
Delete Check to delete the entry. It will be deleted during the next save.
ID Indicates the index of the entry. The range is from 1 to 65535.
Desc Indicates this event, the string length is from 0 to 127, default is a null string.
Type Indicates the notification of the event, the possible types are:
none: No SNMP log is created, no SNMP trap is sent.
log: Create SNMP log entry when the event is triggered.
snmptrap: Send SNMP trap when the event is triggered.
logandtrap: Create SNMP log entry and sent SNMP trap when the event is
triggered.
Community Specify the community when trap is sent, the string length is from 0 to 127,
default is "public".
Event Last Time Indicates the value of sysUpTime at the time this event entry last generated an