Alloy AS5010-P, User Manual

Page: 93 / 435

AS Series User Manual
92
Doc No.: AS5-0116-01
assigned VLAN is enabled on that port. When unchecked, RADIUS-server
assigned VLAN is disabled on all ports.
Guest VLAN
Enabled A Guest VLAN is a special VLAN - typically with limited network access - on
which 802.1X-unaware clients are placed after a network administrator-
defined timeout. The switch follows a set of rules for entering and leaving the
Guest VLAN as listed below.
The "Guest VLAN Enabled" checkbox provides a quick way to globally
enable/disable Guest VLAN functionality. When checked, the individual ports'
ditto setting determines whether the port can be moved into Guest VLAN.
When unchecked, the ability to move to the Guest VLAN is disabled on all
ports.
Guest VLAN ID
This is the value that a port's Port VLAN ID is set to if a port is moved into the
Guest VLAN. It is only changeable if the Guest VLAN option is globally enabled.
Valid values are in the range [1; 4095].
Max Reauth Count The number of times the switch transmits an EAPOL Request Identity frame
without response before considering entering the Guest VLAN is adjusted with
this setting. The value can only be changed if the Guest VLAN option is globally
enabled.
Valid values are in the range [1; 255].
Allow Guest VLAN
if EAPOL Seen The switch remembers if an EAPOL frame has been received on the port for
the life-time of the port. Once the switch considers whether to enter the Guest
VLAN, it will first check if this option is enabled or disabled. If disabled
(unchecked; default), the switch will only enter the Guest VLAN if an EAPOL
frame has not been received on the port for the life-time of the port. If
enabled (checked), the switch will consider entering the Guest VLAN even if an
EAPOL frame has been received on the port for the life-time of the port.
The value can only be changed if the Guest VLAN option is globally enabled.
Port Configuration The table has one row for each port on the selected switch and a number of
columns, which are,
Port Physical port of the switch.
Admin State If NAS is globally enabled, this selection controls the port's authentication
mode. The following modes are available:
Force Authorized In this mode, the switch will send one EAPOL Success
frame when the port link comes up, and any client on the port will be allowed
network access without authentication.