Alloy AS5010-P User Manual Download Page 198 | Manualshive

Page: 198 / 435

background image

AS Series User Manual

197

Doc No.: AS5-0116-01

VLANs that haven't been created. By configuring the ports that connect the
cloud of switches as trunking ports, they can seamlessly carry those VLANs from
one end to the other.

Ingress Acceptance

Hybrid ports allow for changing the type of frames that are accepted on ingress.

Tagged and Untagged

Both tagged and untagged frames are accepted.

Tagged Only

Only tagged frames are accepted on ingress. Untagged frames are discarded.

Untagged Only

Only untagged frames are accepted on ingress. Tagged frames are discarded.

Egress Tagging

Ports in Trunk and Hybrid mode may control the tagging of frames on egress.

Untag Port VLAN

Frames classified to the Port VLAN are transmitted untagged. Other frames are
transmitted with the relevant tag.

Tag All

All frames, whether classified to the Port VLAN or not, are transmitted with a
tag.

Untag All

All frames, whether classified to the Port VLAN or not, are transmitted without a
tag.

This option is only available for ports in Hybrid mode.

Allowed VLANs

Ports in Trunk and Hybrid mode may control which VLANs they are allowed to
become members of. Access ports can only be member of one VLAN, the
Access/Untagged VLAN.

The field's syntax is identical to the syntax used in the Existing VLANs field. By
default, a port may become member of all possible VLANs, and is therefore set
to 1-4095.

The field may be left empty, which means that the port will not be member of
any of the existing VLANs, but if it is configured for VLAN Trunking it will still be
able to carry all unknown VLANs.

Forbidden VLANs

A port may be configured to never be member of one or more VLANs. This is
particularly useful when dynamic VLAN protocols like MVRP and GVRP must be
prevented from dynamically adding ports to VLANs.

The trick is to mark such VLANs as forbidden on the port in question. The syntax
is identical to the syntax used in the Existing VLANs field.

By default, the field is left blank, which means that the port may become a

«
...
196
197
198
199
200
...
»

Summary of Contents for AS5010-P




















































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AS5010-P

Brand: Vector Pages: 6

Brand: Aube Technologies Pages: 118

Brand: HMS Networks Pages: 16

Brand: FS Pages: 33

Anaconda Switcher VK68A

Brand: X10 Pages: 2

Web-Smart GS-1208M

Brand: Ruby Tech Pages: 2

TigerAccess SMC7824M/FSW

Brand: SMC Networks Pages: 2

Brand: Black Box Pages: 4

Brand: Minicom DX Pages: 36

Brand: Phonic Pages: 16

Brand: HighSecLabs Pages: 2

Brand: TLS Electronics Pages: 12

Brand: DeLOCK Pages: 26

Brand: hager Pages: 2

Brand: Kramer Pages: 2

Brand: H3C Pages: 39

Brand: Xantech Pages: 5

Brand: SEH Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands