Alloy AS5010-P User Manual Download Page 185

Page: 185 / 435

AS Series User Manual

184

Doc No.: AS5-0116-01

Power Delay

This section is used to configure time periods in which particular ports will power on the connected
PoE devices.

Information

This section is used to configure PoE Power Delay settings on the AS Series switches.

Select Configuration > PoE > Power Delay

Enable or Disable the Power Delay function for each port and set the delay period in
seconds.

Click the Apply button to save your changes or the Reset button to revert to previous
settings.

Fig: PoE Power Delay

Parameter

Description

Port

This is the logical port number for this row

Delay Mode

Turn on / off the power delay function.
Enabled: Enable POE Power Delay.
Disabled: Disable POE Power Delay.

Delay Time (0-
300sec)

When rebooting, the PoE port will start to provide power to the PD when it out
of delay time. default: 0, range: 0-300 sec.

Summary of Contents for AS5010-P




















































































































































































































































































































































































































































Search results

Summary of Contents for AS5010-P

Reviews:

Related manuals for AS5010-P

Brands by name

Popular brands

Alloy AS5010-P, User Manual

Search results

Summary of Contents for AS5010-P

Reviews:

Related manuals for AS5010-P

Brands by name

Popular brands