Alloy AS5010-P, User Manual

Page: 92 / 435

AS Series User Manual
91
Doc No.: AS5-0116-01
the switch and the client, so this will not detect
Whether the client is still attached or not, and the only way to free any
resources is to age the entry.
Hold Time This setting applies to the following modes, i.e. modes using the Port Security
functionality to secure MAC addresses:
• Single 802.1X
• Multi 802.1X
• MAC-Based Auth.
If a client is denied access - either because the RADIUS server denies the client
access or because the RADIUS server request times out (according to the
timeout specified on the "Configuration→Security→AAA" page) - the client is
put on hold in the Unauthorized state. The hold timer does not count during
an on-going authentication.
In MAC-based Auth. mode, the switch will ignore new frames coming from the
client during the hold time.
The Hold Time can be set to a number between 10 and 1000000 seconds.
RADIUS-Assigned
QoS Enabled RADIUS-assigned QoS provides a means to centrally control the traffic class to
which traffic coming from a successfully authenticated supplicant is assigned
on the switch. The RADIUS server must be configured to transmit special
RADIUS attributes to take advantage of this feature (see RADIUS-Assigned QoS
Enabled below for a detailed description)
The "RADIUS-Assigned QoS Enabled" checkbox provides a quick way to globally
enable/disable RADIUS-server assigned QoS Class functionality. When checked,
the individual ports' ditto setting determine whether RADIUS-assigned QoS
Class is enabled on that port. When unchecked, RADIUS-server assigned QoS
Class is disabled on all ports.
RADIUS-Assigned
VLAN Enabled RADIUS-assigned VLAN provides a means to centrally control the VLAN on
which a successfully authenticated supplicant is placed on the switch.
Incoming traffic will be classified to and switched on the RADIUS-assigned
VLAN.
The RADIUS server must be configured to transmit special RADIUS attributes
to take advantage of this feature (see RADIUS-Assigned VLAN Enabled below
for a detailed description).
The "RADIUS-Assigned VLAN Enabled" checkbox provides a quick way to
globally enable/disable RADIUS-server assigned VLAN functionality. When
checked, the individual ports' ditto setting determine whether RADIUS-