Alloy AS5010-P, User Manual

Page: 191 / 435

AS Series User Manual
190
Doc No.: AS5-0116-01
Aging Configuration
By default, dynamic entries are removed from the MAC table after 300 seconds. This removal is also
called aging.
Configure aging time by entering a value here in seconds; for example, Age time seconds.
The allowed range is 10 to 1000000 seconds.
Disable the automatic aging of dynamic entries by checking Disable automatic aging.
MAC Table Learning
If the learning mode for a given port is greyed out, another module is in control of the mode, so that
it cannot be changed by the user. An example of such a module is the MAC-Based Authentication
under 802.1X. Each port can do learning based upon the following settings:
Parameter Description
Auto
Learning is done automatically as soon as a frame with unknown SMAC is
received.
Disable No learning is done.
Secure Only static MAC entries are learned, all other frames are dropped.
Static MAC Table Configuration
The static entries in the MAC table are shown in this table. The static MAC table can contain 64
entries. The maximum of 64 entries is for the whole stack, and not per switch.
The MAC table is sorted first by VLAN ID and then by MAC address.
Parameter Description
Delete Check to delete the entry. It will be deleted during the next save.
VLAN ID The VLAN ID of the entry.
MAC Address The MAC address of the entry.
Port Members Checkmarks indicate which ports are members of the entry. Check or uncheck
as needed to modify the entry.
Adding a New
Static Entry Click to add a new entry to the static MAC table. Specify the VLAN ID, MAC
address, and port members for the new entry. Click Apply.
Buttons Apply – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved