Alloy AS5010-P, User Manual

Page: 76 / 435

AS Series User Manual
75
Doc No.: AS5-0116-01
Trap Event Severity
This
page displays the current trap event severity configurations. These options can also be
configured here.
Information
To configure the SNMP Trap Event parameters via the Web Interface:
1. Select Configuration > Security > Switch > SNMP > Trap Severity Configuration.
2. Select an SNMP Trap number and click the number to add the trap information. Up to 6
traps can be configured.
3. If you have any Trap entries that you would like to delete, click on the delete button next to
the Trap that you would like to delete.
4. Click the Save button to apply changes
Fig: The Trap Event Severity Configuration
Parameter Description
Group Name The name identifying the severity group.
Severity Level Every group has an severity level. The following level types are supported:
<0> Information: Information messages.
<1> Warning: Warning conditions.
<2> Error: Error conditions.