Alloy AS5010-P, User Manual

Page: 67 / 435

AS Series User Manual
66
Doc No.: AS5-0116-01
Users
This
function is used to configure SNMPv3 Users.
Information
To configure the SNMP User parameters via the Web Interface:
1. Select Configuration > Security > Switch > SNMP > Users.
2. Click Add New Entry.
3. Enter the appropriate Engine ID and User Name.
4. Select the required Security level, Authentication and Privacy, Authentication and No
Privacy or No Authentication and No Privacy.
5. If using Authentication, select the required Authentication Protocol and enter a password.
6. If using Privacy, select the required Privacy Protocol and enter a password.
7. Click Apply to confirm your settings change.
Fig. SNMPv3 User Configuration
Parameter Description
Delete Tick the check box next to the entry you want to delete and click the Apply
button.