Alloy AS5010-P, User Manual

Page: 33 / 435

AS Series User Manual
32
Doc No.: AS5-0116-01
Ports Configuration
Ports
Ports settings such disabling and enabling ports, forcing link speed and setting duplex settings as well
as the current port status can be shown in this section.
Information
To configure the Port Configuration Setting parameters via the Web Interface:
1. Select Configuration > Ports Configuration > Ports.
2. If you are required to force the link speed of a particular port, select the speed from the
drop down box under Speed - Configured for the appropriate port(s).
3. If Flow Control is required on a particular port check the tick box under Flow Control –
Configured for the appropriate port(s).
4. The Maximum Frame Size can be selected on a per port basis. Enter the maximum frame
size required.
5. If the port is receiving Excessive Collisions each port can be configured to discard packets or
have the port restart backoff algorithm. These options can be selected from the drop down
box under Excessive Collision Mode.
6. Click Apply to confirm your settings change.