manualshive.com logo in svg

Allied Telesis AT-S63, Features Manual

The Allied Telesis AT-S63 is a high-performance network switch that offers advanced features and seamless connectivity. For easy setup and configuration, download the free Cli User's Manual from our website manualshive.com. This comprehensive manual guides you through every aspect of the product, ensuring optimal performance and reliability.

Share
Download
background image

AT-S63 Management Software Features Guide

5

Load Distribution Methods.............................................................................................................................. 108
Guidelines....................................................................................................................................................... 109

Chapter 8: Port Mirror 

................................................................................................................................. 111

Supported Platforms....................................................................................................................................... 112
Overview......................................................................................................................................................... 113
Guidelines....................................................................................................................................................... 113

Section II: Advanced Operations ........................................................................... 115

Chapter 9: File System 

................................................................................................................................ 117

Overview......................................................................................................................................................... 118
File Naming Conventions ............................................................................................................................... 119
Using Wildcards to Specify Groups of Files ................................................................................................... 120

Chapter 10: Event Logs and the Syslog Client 

......................................................................................... 121

Supported Platforms....................................................................................................................................... 122
Overview......................................................................................................................................................... 123
Event Messages ............................................................................................................................................. 123
Syslog Client................................................................................................................................................... 124

Chapter 11: Classifiers 

................................................................................................................................ 125

Supported Platforms....................................................................................................................................... 126
Overview......................................................................................................................................................... 127
Classifier Criteria ............................................................................................................................................ 129
Guidelines....................................................................................................................................................... 134

Chapter 12: Access Control Lists 

.............................................................................................................. 135

Supported Platforms....................................................................................................................................... 136
Overview......................................................................................................................................................... 137
Parts of an ACL .............................................................................................................................................. 139
Guidelines....................................................................................................................................................... 140
Examples........................................................................................................................................................ 141

Chapter 13: Class of Service 

...................................................................................................................... 147

Supported Platforms....................................................................................................................................... 148
Overview......................................................................................................................................................... 149
Scheduling...................................................................................................................................................... 152

Strict Priority Scheduling .......................................................................................................................... 152
Weighted Round Robin Priority Scheduling ............................................................................................. 152

Chapter 14: Quality of Service 

................................................................................................................... 155

Supported Platforms....................................................................................................................................... 156
Overview......................................................................................................................................................... 157
Classifiers ....................................................................................................................................................... 159
Flow Groups ................................................................................................................................................... 160
Traffic Classes................................................................................................................................................ 161
Policies ........................................................................................................................................................... 162
QoS Policy Guidelines.................................................................................................................................... 163
Packet Processing.......................................................................................................................................... 164
Bandwidth Allocation ...................................................................................................................................... 164
Packet Prioritization........................................................................................................................................ 164
Replacing Priorities......................................................................................................................................... 166
VLAN Tag User Priorities ............................................................................................................................... 166
DSCP Values.................................................................................................................................................. 166
DiffServ Domains............................................................................................................................................ 167
Examples........................................................................................................................................................ 169

Summary of Contents for AT-S63



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AT-S63

M-Audio Afro-Cuban Percussion Quick Start Manual preview
Afro-Cuban Percussion
Brand: M-Audio Pages: 5
I.R.I.S. POWERSCAN 9.5 User Manual preview
POWERSCAN 9.5
Brand: I.R.I.S. Pages: 182
AVG 8.5 ANTI-VIRUS - LINUX-FREEBSD REV 85.2 User Manual preview
8.5 ANTI-VIRUS - LINUX-FREEBSD REV 85.2
Brand: AVG Pages: 234
MacroSystem Digital Video DVD-Arabesk 2 User Manual preview
DVD-Arabesk 2
Brand: MacroSystem Digital Video Pages: 28
Siemens OC130S Installation Instructions Manual preview
OC130S
Brand: Siemens Pages: 11
Siemens ID Mouse V 3.1 User Manual preview
ID Mouse V 3.1
Brand: Siemens Pages: 28
Siemens ROS User Manual preview
ROS
Brand: Siemens Pages: 32
Siemens OpenScape Xpressions PhoneMail User Manual preview
OpenScape Xpressions PhoneMail
Brand: Siemens Pages: 110
Navman SmartST 2009 User Manual preview
SmartST 2009
Brand: Navman Pages: 82
Intel ITANIUM ARCHITECTURE Manual preview
ITANIUM ARCHITECTURE
Brand: Intel Pages: 604
F-SECURE MOBILE SECURITY FOR S60 - User Manual preview
MOBILE SECURITY FOR S60 -
Brand: F-SECURE Pages: 33
Pantone Goe System User Manual preview
Goe System
Brand: Pantone Pages: 12
FieldServer FS-8700-54 Driver Manual preview
FS-8700-54
Brand: FieldServer Pages: 8
Novell IDENTITY MANAGER 3.6.1 - STAGING BEST PRACTICES GUIDE 2010 Implementation Manual preview
IDENTITY MANAGER 3.6.1 - STAGING BEST PRACTICES GUIDE 2010
Brand: Novell Pages: 54
TANDBERG MOVI 4.0 - ADMINISTRATOR GUIDE 09-2010 Administrator'S Manual preview
MOVI 4.0 - ADMINISTRATOR GUIDE 09-2010
Brand: TANDBERG Pages: 22
FARONICS DEEP FREEZE ENTERPRISE Manual preview
DEEP FREEZE ENTERPRISE
Brand: FARONICS Pages: 104
TC Electronic V-STATION User Manual preview
V-STATION
Brand: TC Electronic Pages: 24
Canon EOS DIGITAL REBEL XT/350D DIGITAL Instruction Manual preview
EOS DIGITAL REBEL XT/350D DIGITAL
Brand: Canon Pages: 42

Brands by name

Popular brands

Load more brands