manualshive.com logo in svg

Allied Telesis AT-S63, Features Manual

The Allied Telesis AT-S63 is a high-performance network switch that offers advanced features and seamless connectivity. For easy setup and configuration, download the free Cli User's Manual from our website manualshive.com. This comprehensive manual guides you through every aspect of the product, ensuring optimal performance and reliability.

Share
Download
background image

AT-S63 Management Software Features Guide

Section VI: Virtual LANs

291

Generic Attribute Registration Protocol (GARP) Overview

The following is a technical overview of GARP. An understanding of GARP 
may prove helpful when you use GVRP. 

The purpose of the

 Generic Attribute Registration Protocol

 (GARP) is to 

provide a generic framework whereby devices in a bridged LAN, for 
example end stations and switches, can register and deregister 

attribute

 

values, such as VLAN Identifiers, with each other. In doing so, the 
attributes are propagated to devices in the bridged LAN, and these 
devices form a “reachability” tree that is a subset of an active topology. For 
a bridged LAN, the active topology is normally that created and maintained 
by the Spanning Tree Protocol

 

(STP). 

To use GARP, a GARP application must be defined. The Layer 2 switch 
has one GARP application presently implemented, GVRP.

The GARP application specifies what the attribute represents.

GARP defines the architecture, rules of operation, state machines and 
variables for the registration and deregistration of attribute values. By 
itself, GARP is not directly used by devices in a bridged LAN. It is the 
applications of GARP that perform meaningful actions. The use of GVRP 
allows dynamic filter entries for VLAN membership to be distributed 
among the forwarding databases of VLAN-active switches.

A GARP participant in a switch or an end station consists of a GARP 
application component, and a 

GARP Information Declaration

 (GID) 

component associated with each port of the switch. One such GARP 
participant exists per port, per GARP application. The 

GARP Information 

Propagation

 (GIP) component propagates information between GARP 

participants for the same application in a switch. Protocol exchanges take 
place between GARP participants by means of LLC Type 1 services, using 
the group MAC address and PDU format defined for the GARP application 
concerned.

Every instance of a GARP application includes a database to store the 
values of the attributes. Within GARP, attributes are mapped to GID 
indexes.

Summary of Contents for AT-S63



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AT-S63

Canon PowerShot G10 - Digital Camera - Compact Software User'S Manual preview
PowerShot G10 - Digital Camera - Compact
Brand: Canon Pages: 49
Juniper JUNOS PUS MOBILE SECURITY SUITE Datasheet preview
JUNOS PUS MOBILE SECURITY SUITE
Brand: Juniper Pages: 6
AMX G4 PANELPREVIEW V1.2 Instruction Manual preview
G4 PANELPREVIEW V1.2
Brand: AMX Pages: 16
Cisco Unity Express 8.0 Voice-Mail System User Manual preview
Unity Express 8.0 Voice-Mail System
Brand: Cisco Pages: 50
Cisco TELEPRESENCE MANAGEMENT SUITE PROVISIONING Troubleshooting Manual preview
TELEPRESENCE MANAGEMENT SUITE PROVISIONING
Brand: Cisco Pages: 16
Cisco Unified MeetingPlace H.323/SIP Administrator'S Manual preview
Unified MeetingPlace H.323/SIP
Brand: Cisco Pages: 54
Cisco PVDM2 24DM - Digital Modem Module User Manual preview
PVDM2 24DM - Digital Modem Module
Brand: Cisco Pages: 48
Cisco TELEPRESENCE MANAGEMENT SUITE SECURE SERVER Configuration Manual preview
TELEPRESENCE MANAGEMENT SUITE SECURE SERVER
Brand: Cisco Pages: 34
Cisco SGACL Configuration Manual preview
SGACL
Brand: Cisco Pages: 8
Cisco Unified Videoconferencing Manager Installation Manual preview
Unified Videoconferencing Manager
Brand: Cisco Pages: 22
Cisco SMART BUSINESS COMMUNICATIONS SYSTEM Feature Reference preview
SMART BUSINESS COMMUNICATIONS SYSTEM
Brand: Cisco Pages: 27
Cisco MDS 9222i - Multiservice Modular Fabric Switch Release Note preview
MDS 9222i - Multiservice Modular Fabric Switch
Brand: Cisco Pages: 40
Cisco MCS 7825 Series Installation Manual preview
MCS 7825 Series
Brand: Cisco Pages: 20
Cisco Surveillance Media Server Installing And Upgrading preview
Surveillance Media Server
Brand: Cisco Pages: 14
Cisco OL-5490-01 User Manual preview
OL-5490-01
Brand: Cisco Pages: 92
Cisco TelePresence Movi 4.1 Administrator'S Manual preview
TelePresence Movi 4.1
Brand: Cisco Pages: 29
Cisco MeetingPlace Video Integration Administrator'S Manual preview
MeetingPlace Video Integration
Brand: Cisco Pages: 84
Cisco SMTP Administration Manual preview
SMTP
Brand: Cisco Pages: 48

Brands by name

Popular brands

Load more brands